We’re working with Robotime to try out their cutest kits and this time it’s a working Christmas Cuckoo Clock from their ROKR range with lights, music and a revolving Santa!

I always try to pick something that feels a bit different to previous kits and a Christmas Cuckoo Clock felt very unique with a lot of fun features. I really like crafts where you end up with something useful at the end and this can be hung on the wall to tell you the time, as well as being festive decor for the holidays.


I feel pretty experienced with Robotime kits now so even though this is from their more advanced ROKR range, I wasn’t too intimidated after opening it up. As always, there’s a lot of printed wood sheets, along with an array of mechanical things to make the clock, lights and movement work. You also get tools and supplies including a screwdriver, sandpaper board, wax stick, screws and nails. All you need to add are 3 AAA batteries.

A full colour instruction booklet is also included and similar to my previous Rolife reviews. The instructions are in multiple languages with diagrams of each step. As a kit with a higher difficulty rating (4/5 stars) you do need to read each step carefully and make sure you have all the correct pieces and are joining them together as pictured, especially when there’s a printed design on one side.

I was happy to see the cuckoo was the very first thing to build! This is so that you can test all the electrical features before they get individually tucked away inside the clock build. I jumped out of my skin when I turned on the cuckoo as it was so much louder than I expected! Once I calmed down, it was super cool to see it moving and chirping.

Building the base was pretty straightforward, and similar to the Christmas Melody Tree. Just clicking pieces of wood into place, and adding the motor. I didn’t really understand what that brown plastic gear with magnets was going to do but we will find out later!

I was expecting to have to stop here for the day but it was all going really fast so I carried on building the clock on top. This has a lot of layers and looks really pretty.


I thought this door was so clever. It holds the battery pack and the outer door is held in place by a drop bar. That means you can raise the bar, pull off the outer door and change batteries easily. Getting all the cables connected to the correct slot was very fiddly but you only have it do it once. Once again, I have failed to take any photos of the lighting but this is a long cable with little LED bulbs that you wind around various pegs hidden in the front of the clock.


The next day I worked on the roof and that was definitely the most frustrating part. The top piece in the left photo is screwed in to hold the front and back together but it wouldn’t go quite tight enough. You can see that the base under the brown cuckoo house and the brown fretwork piece near the bottom of the photo are not fully clicked in. The roof is added in steps and it was quite stressful trying to pop those 2 inner pieces back into place while squeezing everything together so each roof piece would fit into the right holes. The base clicked out again after I’d built half the roof and I had to do it all again but thankfully it all stayed put the second time.

The whole clock is quite light and fragile so you need to take a lot of care when lifting or moving it around. A big skill you need is being able to judge where you can put enough pressure to click pieces into place without snapping something. I had a few scares but there’s also a lot of spare pieces. One feature I really appreciated was that after you build the hanging weights (the patterned pieces above), there are slots nearby to secure them out of the way so the base is flat.


I was surprised to see I was already near the finish and just had some outer decorations to add! I was a little baffled by Santa’s sleigh with chain and ball bearings but once I was told to wax the bottom, I realised this ties up with the moving gear and magnets to move it around the clock! It took all my willpower to stop here for the day without seeing it move but I knew if there were any issues with the electrical stuff I would need a fresh brain.
That turned out to be a smart move as everything worked perfectly except Santa. It took a lot of tries – and many many cuckoos! – until I eventually opened up part of the base to be able to see the magnets moving. Once I found a better spot to get the ball bearings lined up with the magnets, it was all good. The slight jerky movement actually adds to the charm and feels a bit like clockwork.

The finished clock looks so cute! The left bell on the base is the power button – you can click it any time to start the cuckoo sequence and there are also two clock modes, with or without a cuckoo on the hour. It’s really fun when you’re working nearby or have friends round but too loud to leave it on all day and night. Something is a little off though as Santa doesn’t always appear. It makes it quite funny though, and little extra surprise – Santa is a busy man and you can’t always see him when you want to!


I was excited to try hanging it up but I was also scared of it falling off and breaking. There are two hanging options included – one with an adhesive and one with nails, neither of which is ideal in a rented flat. Both of those slot into a piece on the back of the clock so you can also just slide that onto an existing nail, which is what I did. Mine are all too high up really, but I prefer how it looks sitting on the mantelpiece anyway. I had to get a few of my Christmas decorations out early for these photos but I’m enjoying it already.
You can see the whole clock working in Robotime’s video. My own video is too big to embed here but I’ll share it on Instagram later today and add a link.

Overall, I really enjoyed building this kit and found it much quicker and easier to make than I expected. There were a few fiddly and tricky bits but nothing too difficult. I think you could make this as your first kit, if you’re good on details. Otherwise, I would recommend trying something a little easier first to get some experience with the process. I’m enjoying having it on display and it should be easier to store than the Christmas Melody Tree as it can fit in a box.

The ROKR Christmas Cuckoo Clock is priced at £62.99/$67.99 and there are lots more cute Christmas kits to choose from too, including more affordable options. Everything is available now from the Robotime online shop, which ships worldwide from China. If you’d like to try them, SCK readers get 10% off any order with the code supercutekawaii, and there’s also offers and giveaways happening now for Black Friday.
We have a few more kits to try so look out for another post soon about extending my Super Creator miniature house.
(Kit was provided by Robotime for review but all words, photographs and opinions are my own.)












Leave a Reply